WA211.WA211B

WA211A and WA211B are the high performance IEEE 802.11a/n compliant waterproof outdoor (IP55) wireless access point with 2T2R MIMO data, rate up to 300Mbps and wireless coverage up to 2km. WA211 is equipped with 2 external 5dBi antennas, whilst WA211B has internal directional high power, high gain 13dBi antenna. The 5G + auto channel selection effectively prevents traffic congestion. The web-based utility brings easy and secure management and firmware upgrade. WA211 series is an ideal cost-effective high speed wireless communication solution with multiple operation modes for outdoor surveillance applications.
Related Downloads Inquiry cart

High Throughput and Extended Range Wireless Communication
・Compliant with IEEE 802.11a/n with 2T2R MIMO and data rate up to 300Mbps
・Long wireless transmission distance up to 2 km
・Supports Base Station, Point to Point, Point to 
Multiple Points connectivity 

High power, high gain, and smart RF management
Max. 27dBm output power and -89dBm Rx sensitivity
5/13dBi antenna gain
5G + auto channel selection  to avoid congestion
IGMP snooping and WMM QoS, ideal for video streaming 

Easy and secure management
・HTTPs/ SNMP v3/ CLI / VAC management
・Built-in WPA, WPA2/ 802.1X/ Firewall security
・Multiple operating modes: Wireless 
AP/Client/Bridge for different applications

 

Rugged Design for Wayside Surveillance
・Outdoor waterproof IP55 enclosure
・24V Passive PoE and Pole mount installation for wayside surveillance applications
・-20°~70°C operating temp. for harsh environments
・CE Marking

・Emission: FCC part 15 sub B, sub E 

Specifications
 Technology
Standard IEEE 802.3u 100Base-TX Fast Ethernet 
IEEE 802.11a/n 5G Wireless LAN
 Interface
Ethernet Port 1 x 10/100Base-TX RJ45, Auto Negotiation
Passive PoE 24V (Max. 50 meters distance)
System LED 1 x Power: Green On
1 x LAN: Green On, Green Blinking in activity
1 x WLAN: Green ON when enabled, Green OFF when disabled, Green Blinking while transmitting data

3 x Signal: Green ON, 3: Excellent, 2: Good, 1: Weak
Rsest Default Settings Reset (over 5 Seconds)
SMA Socket 2 x RP-SMA (WA211)
 WLAN
Radio Type 5G IEEE 802.11a/n
IEEE 802.11 a/n Modulation: OFDM (BPSK, QPSK, 16 QAM, 64 QAM)
Operating Frequency:
  FCC: 5.15GHz~5.25GHz ; 5.725GHz~5.85GHz
  NCC: 5.15GHz~5.25GHz ; 5.725GHz~5.85GHz
  CE: 5.15GHz~5.35GHz ; 5.47GHz~5.725GHz
Maximum MIMO:2T2R
RF Output Power (1TX):
802.11a:
  6~24Mbps: 23dBm (5150~5725MHz)
  54Mbps: 20dBm ( 5150~5725MHz)
  6~24Mbps: 20dBm (5725~5850MHz)
  54Mbps: 20dBm ( 5725~5850MHz)
802.11an HT20
  MCS0/8: 23dBm (5150~5725MHz)
  MCS7/15: 19dBm ( 5150~5725MHz)
  MCS0/8: 20dBm (5725~5850MHz)
  MCS7/15: 19dBm ( 5725~5850MHz)
802.11an HT40
  MCS0/8: 21dBm (5150~5725MHz)
  MCS7/15: 19dBm ( 5150~5725MHz)
  MCS0/8: 20dBm (5725~5850MHz)
  MCS7/15: 19dBm ( 5725~5850MHz)
RF Sensitivity (1RX)
802.11a:
  6Mbps: -89dBm
  54Mbps: -70dBm

802.11an HT20:
  MCS0/8: -83dBm
  MCS7/15: -65dBm
802.11an HT40:
  MCS0/8: -80dBm
  MCS7/15: -62dBm
Check detail TX/RX information in User Manual
 Power Requirement
Power DC24V/1A, AC Adapter: 100~240VAC
Power Consumption Max 12W
 Software
Management  Interface WebGUI, Telnet/SSH, SNMP
Time Management NTP
Network Management IPv4, SNMP v1/v2/v3/Trap, MIBs, DHCP ​server/client, System Log
Traffic Management NAT Routing, Traffic Shaping
Security Firewall (Inbound/outbound), DMZ, Port Forwarding, HTTPs, SSH
Redundancy Protocol Spanning Tree Protocol (STP)
WLAN Configuration WLAN Basic Settings: Radio on/off, 5G 11an Band and Frequency selection, SSID/Multi-SSID configuration, SSID broadcast, VLAN ID, advanced WLAN settings, 802.1X
 Mechanical
Installation Pole Mount
Enclosure Material Plastic
Dimension WA211: 47.65(W) x 255.6(H) x 110.98(D) mm; WA211B: 64(W) x 205(H) x 61(D) mm
Ingress Protection IP55
Weight Around 500g  
 Environmental
Operating Temperature & Humidity -20°C~70°C , 10%~95% Non-Condensing
Storage Temperature -30°C~80°C
Warranty 2 years
 Approval
Safety EN 60950-1:2006+A11:2009+A1:2010+A12:2011
FCC Part15 sub B +ICES003
Part15 sub E
CE EN 301 893 V1.7.1
EN 301 489-1 V1.9.2/EN 301 489-17 V2.2.1
EN 300 328 V1.8.1:2012
EN 55022 / EN 55024
EN 60950-1:2006+A11:2009+A1:2010+A12:2011
EN 60950-22
​Energy Related Products (ERP) Directive / WEEE

Datasheet... QIG...
Ordering Information
 Model Name
WA211 Industrial Wireless 802.11 an AP/Client/Bridge, IP55, 5dBi External Antenna x 2
WA211B Industrial Wireless 802.11 an AP/Client/Bridge, IP55, 11dBi +/- 2 dBi Internal 
Package List
1 x Product Unit
2 x Default Antennas, 5dBi (WA211) 
2 x Pole Mounting Rings (WA211)
1 x Pole Mounting Ring (WA211B)
1 x 24 VDC Power cord & PoE Injector 
1 x Ferrite Suppression Core
1 x Grounding Wire
1 x Quick Installation Guide
 
Optional Accessory
 Item
Outdoor Antenna for WA211 TBD
  • High-speed data rate that up to 300Mbps, and long wireless transmission distance up to 2 km.

  • Point to Multiple Points connectivity.

  • 24V Passive PoE and Pole mount installation for easy setup.

  • Built-in WPA / WPA2 / 802.1X / Firewall security features make your network safely.

  • Outdoor waterproof IP55 enclosure and -20~70°C operating temperature for harsh environments.