WA212BP

1.  

High Throughput and Extended Range Wireless Communication

・Compliant with IEEE 802.11n with 2T2R MIMO and data rate up to 300Mbps

・Long wireless transmission distance up to 2 km

・Dual Ethernet wire connection allows expanding the wireless range without bandwidth lost.

・PoE pass-through to deliver power for AP or IP camera

High power, High gain, and Smart RF management

・External Power Amplify reaches Max. 29dBm output power and -96dBm Rx sensitivity

・Directional High-Gain 11dBi Panel Antenna Inside

・Optional 5G Radio with external antenna socket

・Supports AP, Client, WDS AP/Client, multiple SSID for Point to Point/Multiple Points connectivity

Easy and WLAN Secure management

・ HTTPs/ SNMP v3/ CLI management

・ Built-in WPA, WPA2/ 802.1X/ Firewall security

・ Multiple operating modes: Wireless AP/Client/Bridge for different applications

・Reserved USB for the optional external cellular adapter 

Rugged Design for Wayside installation

・ Outdoor waterproof IP55 enclosure

・-30~60oC operating temp. & 24V PoE input

・Easy Pole mount installation for wayside, Port, Airport, Factory & Building applications

Dual Ethernet Routing with Enhanced Cyber Security

・Dual Ethernet port supports one LAN port, one WAN port Router mode or Bridge mode.
・NAT, Firewall, VPN is available in Router mode.
・1:1 NAT, port forwarding and NAPT for local traffic
    protection
・Support Firewall for inbound/outbound traffic, port forwarding
・OpenVPN Server/Client or IPSec*
・Support L2TP with PPP, PAP, CHAP(LCP, IPCP)
・Support GRE tunnel
・HTTPs/SSH secure login
・Support TACACS+ multi-user authentication for privileged user management

Industrial IoT LAN & Cloud Management

・ARP response over 802.2 LLC SNAP
・Support MQTTS, CoAP protocol, ready to use AWS/Azure and Private Cloud Agent for cloud management
・ Diagnostic tool includes Ping, TFTP, SNMP Trap, E-mail Alert and System Log
・WoMaster Software Utilities
    -NetMaster: Network Management System
    -ViewMaster: Configuration Management
    -ThingMaster: Interactive monitoring dashboard by Modbus Tag to collect data from Modbus devices
    -ThingMaster OTA: Realtime map showing the status, signal strength, location of the remote devices, over-the-air batch device registration, configuration and firmware upgrade, alerts on critical events to prevent downtime 

Point to Point and Point to Multiple Points

WA212BP supports AP, Client, and WDS modes. Users can configure one as AP mode, and the other as client mode for point to point connection. It is an easy way to extend the wireless range.

If the user has multiple sites and would like to send traffic to the central point via wireless, the central point can be set as AP mode, and the rest points to be set as Client mode. To enhance the distance of the point to multiple points, the central AP can be WoMaster WA512 with the high gain and Omni-antenna while the WA212BP acts as the client with the directional antenna. 

Long-Range Wireless Connectivity without bandwidth lost

The WA212BP equips with two Ethernet ports for the  Bridge or Router modes. While the two ports work as the Bridge mode, the traffic between the ports switch fast without bandwidth lost. Users can expand wireless coverage within one stand and reach high bandwidth wireless backhaul. While the WAN port is configured, it can support Secure Remote Access through WAN and the Cloud IIoT management.

• Secured Remote Access by VPN

• MQTTS

• ThingsMaster OTA (device management over the air) 

The OTA agent embedded in WR222 upgrades device management over the air, anywhere you are, and any time you want over your mobile devices.  ThingsMaster OTA is a secured local OTA software that can be installed in private or public service or even QNAP NAS (network-attached storage). With OTA, all device information such as location, warning event can be shown in real-time.  The maintenance such as configuration reload or device reboot can also be run by the group.