| Weatherproof IP67 Design
•IP67 Metal Housing with Effective heat dissipation design for operating in -40~70oC environments
•One RJ-45 GbE WAN port and two PoE+ ports
•M8 5-pin connector for one RS232/422/485 with Modbus support for sensors / meters
•M8 5-pin connector for two Digital Inputs from sensor or push button
•M8 5-pin connector for one Digital Output for Alarm or on/off
•M12 T-code connector
- DC48V(46~57V) power input- AC100~240V Input •Internal USB for Storage
PoE Capability
•Two 10/100M PoE+ 802.3at Ports with 30W/per port
•M12 T-code for high current power source
•Complete PoE management including per-port Power Budget Control, PoE Scheduling and PoE Status
•Up to 60W power budget by AC110V or DC48V power
Wireless Expansion
•mPCIe & SIM socket for wireless expansion
•SCB LTE Module and Antenna Kit
-LTE Cat.4 Cellular Module
-LTE/GPS Antenna on the top of the box
-150M UL, 50M DL, FDD/TDD-LTE
•SCB Industrial WLAN Module
-N-Type Antenna Socket on the top of the box
-5G/2.4G 802.11ac/n Wi-Fi
|
Dynamic Routing with Redundancy Protection ・RIPv1&v2, OSPFv1&v2 for intra-domain routing within an autonomous system ・Efficient unicast/multicast static routing ・VRRP guarantees sustainable routing in a single point of failure ・ Wireless Redundancy: WAN to LTE redundancy Enhanced Cyber Security for Critical Application ・Firewall with Stateful Inspection ・DMZ, Port forwarding, NAT for LAN protection ・OpenVPN, IPSec, L2TP, GRE for secure connection ・Port Security ・HTTPs/SSH secure login, TACACS+ Industrial IoT LAN & Cloud Management ・Various configuration paths, including CGI WebGUI, CLI, SNMP and RMON ・WoMaster Software Utilities -NetMaster: Network Management System with auto-topology drawing with VLAN or ERPS Ring -ViewMaster: Configuration Management -ThingMaster: Interactive monitoring dashboard by Modbus Tag to collect data from Modbus devices -ThingMaster OTA: Realtime map showing the status, signal strength, location of the remote devices, over-the-air batch device registration, configuration and firmware update, alerts on critical events to prevent downtime ・Support MQTT protocol, ready to use AWS/Azure and Private Cloud Agent for cloud management ・LLDP for topology control, auto-topology drawing ・USB for easy field configuration and firmware update ・ Diagnostic tool includes Ping, TFTP, SNMP Trap, E-mail Alert and System Log ・ LTE watchdog, auto-reconnect cellular connection |
Outdoor-Smart-City-Box-SCB400
The new generation Smart City Box SCB400 series integrate Smart City and Industrial Internet of Thing (IIoT) applications in one IP67 metal enclosure including two IEEE 802.3at PoE+ ports, one GbE WAN port, one serial port, two DIs and one DO in weatherproof connectors, and powered by AC or DC power inputs. Data can be stored locally in internal USB, or connected remotely by wireless LTE Cat 4/6, LTE M1/NB1, Wireless LAN 802.11 ac/a/n.
The outdoor SCB400 can act as an IoT gateway and controller by Modbus Serial and DIO, a wireless LAN AP, a cellular VPN/NAT/Firewall router, and a PoE injector for IP cameras at the same time. Comparing with traditional assembled cabinets, the SCB400 brings unique values in saving time/cost in system integration, as well as friendly user interface for large group deployment, management, and status visualization in your mobile device. The data can be sent to public AWS/Azure or user-defined cloud server, or to private IoT platform ThingsMaster by WoMaster.
- Built-in Microsoft Azure and Amazon AWS agent
- Secured Remote Access by VPN
SCB400 can act as a VPN server for data encryption and dynamic remote access. Multiple VPN protocols are supported such as IPSec, OpenVPN, GRE, and L2TP. The channels between multiple networks, ex. private/public/hybrid networks are fully secured and with authentication features.
- Cyber Security Guard
A stateful firewall monitor is in place to monitor the state of the connection at all times. Multiple industrial Fieldbus protocols, ex. Modbus TCP, EtherNet/IP are also supported for factory automation applications.
- Secure IoT Modbus Tags
- Tag-based data acquisition with MQTT support
- MQTT client acting as publisher and subscriber
- The latest TLS encryption and X.509 authentication
- Selectable serial port and data type. Sensor alive check and display sensor value
- GPS/BDS/GLONASS/Galileo Positioning
- Secured Multiple Sites Management
- N to N VPN
- Latest TLS encryption and X.509 authentication
- Latest TLS encryption and X.509 authentication
- ThingsMaster OTA (device management over the air)
The OTA agent embedded in SCB400 upgrades device management over the air, anywhere you are and any time you want over your mobile devices. ThingsMaster OTA is a secured local OTA software that can be installed in private or public service or even QNAP NAS (network-attached storage). With OTA, all device information such as location, warning event can be shown in real-time. The maintenance such as configuration reload or device reboot can also be run by the group.
| Technology | |
| Standard | IEEE 802.11ac wireless local area network (WLAN), Backward support 802.11n/g/a/b Wireless LAN (By Request) |
| 3GPP GSM/GPRS/EDGE/UMTS/HSPA/LTE (By Request) | |
| IEEE 802.3 10Base-TX Ethernet | |
| IEEE 802.3u 100Base-TX Fast Ethernet | |
| IEEE 802.3ab 1000Base-T Gigabit Ethernet copper | |
| IEEE 802.3af/at Power-over-Ethernet | |
| IEEE 802.1Q for VLAN | |
| Interface | |
| Ethernet Port | SCB400: LAN: 2 x 10/100Base-TX 802.3at/af PoE+, Auto MDI/MDI-X, Weatherproof RJ-45 connector WAN: 1 x 10/100/1000Base-T Ethernet, Auto MDI/MDI-X, Weatherproof RJ-45 connector SCB400-NP: LAN: 2 x 10/100Base-TX Ethernet, Auto MDI/MDI-X, Weatherproof RJ-45 connector WAN: 1 x 10/100/1000Base-T Ethernet, Auto MDI/MDI-X, Weatherproof RJ-45 connector |
| Power Input | Power Input, 4-pin M12 T-code power connector AC Model: 100~240V AC DC Model: 48V, range from 46~57V |
| Serial | 1 x Software selectable RS232/422/485 interfaces, M8 5-pin connector 15 KV ESD protection for all signals |
| Digital Input/ Relay | M8 5-pin connector 2 x Digital Inputs, Low: 0~1V, High: 2~30V 1x Dry Relay Outputs, 0.5A/24VDC |
| Voice (Optional by request) | 1x Audio Line Out, M5 4-pin connector |
| mPCIe Socket (Reserved for Optional Wireless) |
2 x mPCIe sockets mPCIe/USB bus, available for both LTE and 802.11ac/n/g/a/b WLAN expansion Note: Select the optional LTE or WLAN module from accessory list or contact your sales for suggestion. |
| SIM Socket (Reserved) |
2 x NANO SIM sockets inside, only available for SCB LTE model Reserved eSIM for project based eSIM requirement |
| Antenna Socket (Reserved) |
2 x N-Type female Sockets for SCB LTE or WLAN module expansion |
| USB (Reserved) | Internal 1x USB A-Type socket inside the box Optional by request: Industrial grade USB flash disk as storage |
| Power Requirement | |
| Power Connector | 1 x 4 Pin IP66/67 M12 T-Code power connector |
| Power Input Voltage | AC Model: 100~240VAC DC Model: 48VDC (46~57VDC, 50~57VDC suggested for IEEE802.3at) SCB400-NP Series: 24VDC (8~32VDC) |
| Reverse Polarity Protect | Yes |
| Power Consumption | Max. 12W full traffic without PD loading @ 110VAC Input, suggest to reserve 15% tolerance |
| PoE | |
| Power forwarding mode | 802.3at Alternative A |
| PoE Power Budget | System: Max 60W@55°C, 30W@70°C Port: 4-pair IEEE 802.3af/at, Max. 30W |
| PoE Standard | IEEE 802.3af/at |
| Management | System/Port Power Budget Control, PoE Scheduling, Priority, PD Alive Check, PoE Status |
| Software | |
| Management | CGI WebGUI, Command Line Interface (CLI), IPv4/IPv6*, Telnet, SNMP v1/v2c/v3, DDNS, DHCP server/client, DHCP Relay, TFTP, System Log, SMTP, ARP response over 802.2 LLC SNAP, Proxy ARP, DNS (client/proxy) |
| Traffic Management | Flow Control, Traffic shaping |
| Filter | IEEE802.1Q VLAN |
| Security | IEEE 802.1X/RADIUS, TLS v1.2, HTTPs/SSH, First login password management |
| Advanced Security | TACACS+, Mutli-user authentication |
| Time Management | NTP, SNTP, Cellular Time |
| Redundancy Protocol | WAN/LTE Redundancy |
| WAN/Routing/NAT/Firewall/VPN | Routing: RIPv2, OSPFv2, VRRPv2 NAT: 1-1 NAT, NAPT(SNAT/DNAT) Firewall: Stateful Inspection firewall, DMZ VPN: IPSec, OpenVPN, L2TP, GRE |
| IIoT Industrial Protocol | Modbus RTU, MQTT, RESTful API |
| Private Cloud | ThingsMaster, ThingMaster OTA |
| Public Cloud | AWS Agent, Azure Agent |
| Location | Google map, Baidu map |
| MIB | MIB-II, Entity MIB, WoMaster Private MIB |
| Utility | ViewMaster, NetMaster, Ping, Traceroute |
| Serial communication | TCP Server/TCP Client/UDP mode, TCP Alive check, Force TX Delimiter/Timeout/interval/length, Long Distance Termination |
| Cellular Configuration (By Optional module) |
Radio on/off, 4G LTE/3G HSPA Configuration, SIM Security, Connection Status, Cellular to Eth-WAN Redundancy, GPS positioning |
| WLAN Configuration (By Optional module) |
WLAN Basic Settings: Radio on/off, 2.4G 11n/5G 11ac Band and Frequency selection, SSID/Multi-SSID configuration, SSID broadcast, Cellular to WLAN Auto Offload and advanced WLAN settings, 802.1X |
| Mechanical | |
| Installation | Wall-mount, Pole-mount |
| Enclosure Material | Aluminum |
| GND | Grounding Nut with Washer |
| Dimension | 256 x 306 x 90mm (W x H x D) / without wall-mount poles |
| Ingress Protection | IP67 |
| Weight | SCB400-AC/ SCB400-NP-AC: ~3.8kg SCB400-DC/ SCB400-NP-DC: ~3.6kg |
| Environmental | |
| Operating Temperature & Humidity | -40°C~70°C, 5%~95% Non-Condensing |
| Storage Temperature | -40°C~85°C |
| MTBF | >200,000 hours |
| Warranty | 1 years |
| Approval | |
| CE/FCC | CE (EN501214 Level) / FCC Part 15B |
| Railway Roadside | EN50121-4 Compliance |
| Model Name | Description |
| SCB400-AC | Industrial Smart City Box with 2xFE PoE+, 1GT WAN, AC Input |
| SCB400-DC | Industrial Smart City Box with 2xFE PoE+, 1GT WAN, 48V(46-57V)DC Input |
| SCB400A-AC | Industrial Smart City Box with 2xFE PoE+, 1GT WAN, 1xCOM+2xDI+1xDO, AC Input |
| SCB400A-DC | Industrial Smart City Box with 2xFE PoE+, 1GT WAN, 1xCOM+2xDI+1xDO, 48V(46-57V)DC Input |
| SCB400A-NP-AC | Industrial Smart City Box with 2xFE, 1GT WAN, 1xCOM+2xDI+1xDO, AC Input |
| SCB400A-NP-DC | Industrial Smart City Box with 2xFE, 1GT WAN, 1xCOM+2xDI+1xDO, 24V(8-32V)DC Input |
| Package List | |
| Product Unit | |
| Quick Installation Guide | |
| Mounting Kit Including the Sealing Insert, Clamping Claw, Sealing Nut | |
| SCB400 Assembly Cable Package 1xM12 T-code Power Cable, 1m 3xWaterproof RJ-45 Ethernet Plug, Field-attachable Bayonet Locking type for Ethernet ports (SCB400A) 2xM8 5-pin Signal Cable for Serial and 2DI+1DO, 1.5m |
| Wireless Accessory | |
| SCB400 LTE Module and Antenna Kit, EU Band | Industrial SCB400 LTE Cellular Module, EU Band EU: FDD B1/B3/B5/B7/B8/B20, TDD B38/B40/B41, WCDMA: B1/B5/B8, GSM: B3/B8 GNSS- GPS/GLONASS/BeiDou/Galileo Antenna: 1 or 2x Wide Frequency outdoor Omni-Antenna for LTE/GPS * Check LTE band for your country before purchase, pre-installed service is available. |
| SCB400 LTE Module and Antenna Kit, CN Band | Industrial SCB400 LTE Cellular Module, CN Band CN: FDD B1/B3/B8, TDD B38/B39/B40/B41, TDSCDMA: B34/B39, WCDMA: B1/B8, GSM:900/1800 GNSS- GPS/GLONASS/BeiDou/Galileo Antenna: 1 or 2x Wide Frequency outdoor Omni-Antenna for LTE/GPS * Check LTE band for your country before purchase, pre-installed service is available. |
| SCB400 LTE Module and Antenna Kit, US Band | Industrial SCB400 LTE Cellular Module, US Band US: FDD B2/B4/B12, WCDMA: B2/B4/B5 GNSS-GPS/GLONASS/BeiDou/Galileo Antenna: 1 or 2x Wide Frequency outdoor Omni-Antenna for LTE/GPS * Check LTE band for your country before purchase, pre-installed service is available. |
| SCB400 Industrial WLAN Module | Industrial 5G/2.4G 802.11ac/n Wi-Fi 2T2R Module Antenna: 1 or 2x External 2.4G/5G outdoor Omni-Antennas |
| EN110 | Industrial RS485/ModBus_RTU to LoRa Convertor |
| Antenna Surge Protector | Antenna Surge Protector by request |
.jpg)