SCB211DL is a smart DLMS COSEM Meter Cellular Gateway with LTE or NBIoT network. The IP54 Fire Resistance ABS Enclosure can protect from dust, moisture, and rain from the outdoor environment. The RJ45 connector from Cable Gland connector includes one two-wire RS485 for DLMS Power Meter to read OBIS codes and 12V power input from the Power Meter. No extra power supply is required. To safeguard cybersecurity, security features such as Firewall, OpenVPN, GRE tunnel are supported. The embedded COAP protocol enables HES integration for Smart Meter System. The ThingsMaster OTA safeguards the device from the remote control center to detect and fix abnormalities at local sites.
Related Downloads Inquiry cart

LTE or NBIoT Cellular Network

・LTE Cat.4 or Cat.6, 2T2R MIMO provides 150M downlink and 50M uplink
  - 4G/3G/2G full cellular network compatibility
  - LTE-E: FDD B1/3/7/8/20/28   (2100/1800/850/2600/900/800/700MHz)
・NBIoT + M1
    LTE FDD: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/
    LTE TDD: B39 (For Cat M1 Only)
・Optional WiFi : IEEE 802.11b/g/n for 2.4GHz delivers up to 150Mbps throughput for local Web configuration

Power Meter Connection
・One RJ45 connector for 1 x RS485 Power Meter and Power Input 12VDC
・1 Digital Input, 1 Digital Output, and 1 Ground
・Internal RJ45 Ethernet Port for configuration
・Internal Dual Redundant SIM slots for LTE or NBIoT
・Send DLMS OBIS Codes to HES via COAP protocol
・Directly Powered from Power Meter, no extra power supply needed

Rugged Design for Industrial Outdoor Application

・Effective heat dissipation design for operating in
    -40~65oC environments
・IP54 Protection
・IEC61000-6-2/IEC61000-6-4 heavy industrial EMC


Enhanced Cyber Security & Redundancy

・Support Firewall for inbound/outbound traffic
・OpenVPN (server/client), IPsec for secure remote
・Support L2TP with PPP, PAP, CHAP(LCP, IPCP)
・Support GRE tunnel
・HTTPs/SSH secure login
・Support TACACS+ multi-user authentication for privileged
    user management


Industrial IoT LAN & Cloud Management

・Various configuration paths, including CGI WebGUI, 
     CLI, SNMP
・1:1 NAT, port forwarding and NAPT for local traffic
・Support SNMPv3 and entity-MIB (RFC4133), MIB II(RFC1213)
・NTP v3 time management
・WoMaster Software Utilities
    -NetMaster: Network Management System with auto-topology drawing with VLAN or ERPS Ring
    -ViewMaster: Configuration Management
    -ThingMaster: Interactive monitoring dashboard by Modbus Tag to collect data from Modbus devices
    -ThingMaster OTA: Realtime map showing the status, signal strength, location of the remote devices, over-the-air batch device registration, configuration and firmware update, alerts on critical events to prevent downtime
・ Diagnostic tool includes Ping, TFTP, SNMP Trap, E-mail Alert and System Log