|
Design for Meter & IIoT Application ・Support AC & 48-110VDC in the same connector ・Din Rail, Wall Mount Flexible Installation ・IP51 compliant meter-like housing ・Support -25~70oC environments ・High industrial EMC Protection for AC/DC power input and System ・Tamper detection for the device 4G LTE Cellular Network ・RS232/422/485 full functions for serial over LTE/3G*/2G data transmitting ・Software configurable RS232/422/485 mode ・Reset bottom allows to change RS232 or RS485 mode ・Serial Port Status LED ・ Meter Communication accepts circuit-switched data calls(CSD), the data call can provide IEC 60870-5-101/102 communication through the serial port. |
Enhanced Cyber Security & Redundancy ・Support Hardware reset to cut the power of whole device while critical events are occurred. ・Various configuration paths, including CGI WebGUI, CLI, SNMP ・NAPT for local traffic protection ・Support SNMPv3 and entity-MIB (RFC4133), MIB II (RFC1213) ・NTP v3 time management ・WoMaster Software Utilities -NetMaster: Network Management System with auto-topology -ViewMaster: Configuration Management -ThingMaster OTA: Real-time map showing the status, signal strength, location of the remote devices, over-the-air batch device registration, configuration, and firmware update, alerts on critical events to prevent downtime ・ Diagnostic tool includes Ping, TFTP, SNMP Trap, E-mail Alert and System Log |
WR210A LTE
The WR210A-LTE industrial wireless serial router facilitates the integration of serial data into the cellular network. Its RS232/422/485 port enables the connection of meters, sensors, or RTUs, allowing the transmission of data to a remote cloud or data center through the cellular network. The RS232/422/485 mode is adaptable through software configuration, or the system Reset. The router supports eUICC for eSIM use, and comprehensive management features such as keep alive, periodic reset, time server synchronization, syslog server, SNMP configuration and Trap, as well as firmware and configuration backup/restore. Specifically designed for meter applications, the system is cognizant of the meter presence control protocol.
Ensuring secure connectivity, the router supports IPSec and AES encryption. Housed in a meter-like casing with IP51 protection, it accommodates both AC and 48-110VDC inputs and operates reliably within a wide temperature range of -25 to 70℃.
| Technology | |
| Standard | 3GPP Release 11 Long Term Evolution, fallback 3GPP Release 7,8,9 for HSPA/UMTS |
| IEEE 802.3 10Base-T Ethernet | |
| IEEE 802.3u 100Base-TX Fast Ethernet | |
| Interface | |
| Ethernet Port | 1 x 10/100Base-TX RJ45, Auto-Negotiation, Auto MDI/MDI-X Default mode: Disabled. RJ45 Connector: Internal/External (TBD) |
| Serial |
1x RS232/422/485, 8-pin RJ45 Connector |
| Serial Cable | Standard Accessory: One RJ45 to DB-9(RS232/RS485) Serial Cable, 1.5m RS232 interface: DB9 Female, Pin 2:RX, Pin 3: TX, Pin 5: GND RS485 interface: DB9 Female, Pin 6:RX-, Pin 7: RX+, Pin 8: TX-, Pin 9: TX+ |
| Reset Button /Serial Mode |
Default: RS232 mode RS485 Mode: Press 1~5 seconds, Default Settings Reset: over 10 Seconds |
| SIM Socket | 1x Mini SIM Socket with SIM Tray |
| SMA Socket | 1x SMA-Female for Cellular (Main, SMA-Female) |
| Power Input | 3-Pin Removable Terminal Block Connector AC/DC Input (L/V+, N/V-, GND) |
| Fuse | Fuse can be replaced without opening the case, 10A/250V |
| Watchdog | Software configurable Hardware Watchdog |
| Dying gasp | Send trap or syslog within the remaining time while power lost |
| Tamper detection | Hall-Effect Micro Switch for tamper detection |
| System LED | 1. Power LED: ON: Power On & System Ready, Blinking: System Starting or failure booting 2. WAN LED: ON: LTE Slow Blinking: GPRS 3. Coverage LED: ON: Good Quality & SIM Ready OFF: SIM undetected or incorrect PIN Slow Blinking: Not enough coverage & SIM Ready Fast blinking: Low Coverage & SIM Ready 4. Serial: ON: Serial RS232 Mode Slow Blinking: Serial RS485 Mode Fast Blinking: Ongoing Data Transmitting |
| Cellular Properties | LTE Cat 1 |
| Region: LTE1-E | Standard: LTE 3GPP Release 11 Data Rate: LTE-TDD: DL: Max. 10 Mbps, UL: Max. 5 Mbps Band Information: LTE: FDD B1/3/7/8/20 (2100/1800/2600/900/800MHz) WCDMA: FDD B1/B8 (2100/900MHz) GSM/EDGE/GPRS: B3/B8 (1800/900MHz) *Other LTE Band/ TDD Band by request |
| Power Requirement | |
| Input Voltage | AC: 100-240VAC ± 10% DC: 48-110VDC ± 10% |
| Reverse Polarity Protect | Yes |
| Input Current | 0.12A@48V, 0.05A@110V, 0.063A@85VAC, 0.042A@264VAC |
| Power Consumption | Max 5.76W@48VDC, Max.11.01W@264VAC, suggest to reserve 15% tolerance |
| Software | |
| Management Interface | CGI WebGUI, Command Line Interface (CLI), Telnet/SSH, HTTPS, SNMP TLS (TCP)* and DTLS (UDP)* |
| User Management | Radius client, TACACS+, local database |
| WAN Connectivity | Radio on/off, network selection supports Auto(2G/3G*/LTE), Auto24(2G/LTE), Available Auto, PAP and CHAP Authentication, APN setup, SIM Security, Connection Status, GPS positioning (Static) AT command console allows by Ethernet or Remote Telnet/SSH. Supports SMS configuration mode, access allow to filter 10 allowed data phone number, allow to disable* |
| eUICC international | Compliant with the eUICC international standard published by GSMA, (SGP.02) 1oT eUICC/eSIM compliant and support provisioning. |
| Keep-Alive | Support Keep-alive ICMP Ping, includes Server, Ping wait time*, Number of pings and keep alive period settings. |
| Watchdog | Support Hardware reset to cut the power of whole device while critical events are occurred. Supports configurable Periodic Reset of the whole system*, allowing 12h/24h periodic resets |
| Serial communication | Support RS232/422/485 in one connector, allows remote software configurable and Reset bottom to change the mode (RS422 by web GUI only). Support Modbus RTU/TCP Server/TCP Client/UDP mode, TCP Alive check, Force TX Delimiter/Timeout/interval/length, Long Distance Termination. Support different baud rates from 1200 to 115200bps. Default: 9600, 8E1(8 data bit, even parity, 1 stop bit) * Support FT1.2 frame encapsulation for IEC-60870-5-101 and IEC-60870-5-102 protocol |
| Meter communication | Support the IEC 60870-5-101/102 FT1.2 frame encapsulation. The WAN interface allows incoming GSM(4G/3G*/2G fallback) data call and accepts circuit-switched data calls(CSD), the data call shall provide IEC 60870-5-101/102 communication through the serial port. Provide a configurable Main and Secondary TCP port to use for IEC 60870-5-101/102 communication to meter*. Support meter presence control routine which can periodically send certain IEC 60870-5-101/102 frames to be answered by the meter*. |
| Tamper detection | Send trap or syslog once tamper detection is ON |
| Time Management | NTPv3, SNTP, Cellular Time |
| Network Management | IPv4, SNMP v1/v2c/v3/Trap, MIB II, Entity MIB, DHCP server/client, DHCP relay, TFTP, ARP response over 802.2 LLC SNAP, Proxy ARP, DNS (client/proxy), private MIB |
| Traffic Management | NAPT(SNAT/DNAT), Port Forwarding |
| Security | Firewall, DMZ, HTTPs, SSH |
| VPN | IPSec V2 & AES Encryption IPSec supports Internet Key Exchange version 2 (IKEv2) to negotiate, update, maintain IPsec connections and create security associations (SA) |
| Diagnostic | Restore Default: Restore configuration to ENDESA factory configuration*(Not define yet). Reset bottom allows to reset factory default(press >10s), ICMP Ping Syslog system: RFC5424 complaint, accessible through configuration interface, syslog shall be saved into SD (non-volatile memory), syslog file downloadable, two syslog server can be configured (Check detail syslog facility in manual)* Configuration Update: Import/Export configuration file through configuration interface. SFTP for configuration download and update, protected from non-specific command |
| Utility | ViewMaster for firmware update, configuration backup/restore |
| Mechanical | |
| Installation | Wall Mount: fastening triangle, DIN Rail (35mm) Mount by Din Rail clip |
| Enclosure Material | PC+ABS Alloy Plastic, UL94V0 compliant, insulating, fire-retardant, low CIH, EN 60695-2-11 compliant material |
| Dimension | 116 x 173.9 x 50mm(W x H x D) with Triangle mounting/Din-Rail mounting Clip |
| Ingress Protection | IP51, IEC60529 compliant, IEC61140 class II compliant |
| Weight | Around 350g without package/antenna (TBD) |
| Environmental | |
| Temperature | Operating: -25°C~70°C, Limit range of operation: -40°C~85°C, Storage: -40°C~85°C |
| Humidity | Operating: 5-98% RH@50°C non-condensing, Storage: 98% RH@50°C non-condensing |
| Environment | WEEE: Directive 2012/19/EU compliant, RD 110/2015 compliant Material: Directive 2011/65/EU, 2004/107/EC compliant |
| MTBF | >200,000 hours |
| Warranty | 3 years |
| Approval | |
| CE Marking | CE RED Directive 2014/53/EU Compliance Safety: EN62368-1, EN301489-1/52, RF: EN301 908-1, EN62311 EMI: EN 55032 (55022) class B EMC: EN61000-4-2 ESD EN61000-4-3 RS EN61000-4-4 EFT EN61000-4-5 Surge EN61000-4-6 CS EN61000-4-8 Magnetic Field EN61000-4-11 Dips (AC power) EN61000-4-13 Harmonics EN61000-4-16 Conducted common disturbances EN61000-4-17 Ripple on DC power supply EN61000-4-18 Damped oscillatory wave EN61000-4-29 Voltage Dips (DC power) |
| Other Complaint Standard | IEC60255-27 Impulse Voltage Test, 8kV peak, ≥1s interval AC or DC dielectric voltage test, 4kVrms Insulation resistance, Insulation value >100MΩ, ≥2 times test period IEC 60695-2-11 for Enclosure IEC 60529 IP51 |
| Environment Test | IEC60068-2-1 Cold, -25±3℃, 0% humidity, 24+24+24(h) IEC60068-2-2 Dry Heat, +70±2℃, 50% humidity, 72(h) IEC60068-2-14 Change of temperature, -25±3℃ ~ +70±3℃, 0% humidity, 5 Cycles IEC60068-2-78 Damp Heat, +55±2℃, 93±3% humidity, 96(h) |
| Model Name | Description |
| WR210A-LTE1-E | Industrial Wireless IIoT Serial Router, 1FE+1COM, 1SIM, AC+48-110VDC, 2G GPRS, 3G, 4G LTE Cat1, Europe |
| *Other Country/Band by request | |
| Package List | |
| 1 x Product Unit | |
| 1 x 2-pin Removable Terminal Connector | |
| 1 x Din-Rail mounting Kit | |
| 1 x Triangle mounting kit | |
| 1 x Quick Installation Guide | |
| 1x RJ45 to DB9(RS232) Serial Cable, 1.5m 1x RJ45 to DB9(RS485) Serial Cable, 1.5m 1x LTE antenna 1x Power cable, 1m |