DP410L-LV
  1.  Industrial 10-port Full Gigabit L2 Managed PoE Switch, 8x802.3at PoE, Booster PoE

Industrial PoE Switch DP410L is designed for industrial environments requiring reliable PoE power feeding as well as secured network. DP410L provides 8 RJ45 Giga 802.3at/af PoE+ ports and 2 Giga SFP ports for uplink. The power input accepts 12V/24VDC with power booster for industrial and vehicle applications. Advanced Layer 2 security and features such as 802.1X/RADIUS port-based access control, IP Security/Port Security, management IP/VLAN or management features such as VLAN, QoS, IGMP Snooping, LACP/Trunk are supported. Redundancy is designed with enhanced RSTP protocol.
Related Downloads Inquiry cart

Full Gigabit Switching and Ultra-High Throughput

・ DP410L-LV: 10-port Full Gigabit Ethernet, including 2
    100/1000M SFP and 8 Gigabit 802.3at PoE+ RJ45
・High flexibility of cable types and distances for
    system integrators
・Fiber ports support both 100M and 1000M SFP
・Stores and forwards with non-blocking switch fabric

Management Features

・Various configuration paths, including WebGUI, CLI,
    SNMP
・Layer 2 management features include VLAN, QoS,
    IGMP Snooping, LACP/Trunk
・Enhanced Rapid Spanning Tree (RSTP) for Redundancy
・Traffic management: Port classification, Port policing,
    Port scheduler, Port shaping, QoS control list, WRED,
    Port Security
・LLDP topology control

Extreme PoE Capability

・8-port IEEE 802.3af/at compliant PoE+, up to 30W/port
・12/24V Booster PoE Input
・Complete PoE management including Power Budget Control and PoE Status

Enhanced Cyber Security for Critical Applications

・802.1X/RADIUS port-based access control
・IP Security/Port Security
・HTTPs/ Management IP secure access
・Management VLAN separate the control and data VLAN

Rugged Design for Wayside Network Switching with Wide Power Input Range 

・Wide power range includes 24V Booster design and dual redundant  power input
・Excellent heat dissipation design for operating in
    -40~70oC environments
・High level EMC protection exceeding traffic control
    and heavy industrial standards’ requirements
・IEC 61000-6-2/4 Heavy Industrial Environment
 

Technology

  
Standard IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3u 100Base-FX Fast Ethernet Fiber
IEEE 802.3ab 1000Base-T Gigabit Ethernet Copper
IEEE 802.3z Gigabit Ethernet Fiber
IEEE 802.3x Flow Control and back-pressure
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1p Class of Service (CoS)
IEEE 802.1Q VLAN
IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP)
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
IEEE 802.1X Port based Network Access Protocol
IEEE 802.3at Power Over Ethernet Plus(PoE+), backward compatible with 802.3af PoE

Performance

  
Switch Technology Store and Forward Technology with Non-Blocking Switch Fabric
Number of MAC Address 4K
Packet Buffer Memory 1.75M bits
Transfer performance 10Base-T: 14,880pps, 100Base-TX/FX: 148,800pps, 1000Base-TX/FX: 1,488,100pps
VLAN 4095 VLANs
VLAN ID 1~4095
Traffic Prioritize 8 Priority Queues per Port

Interface

  
Ethernet Port 8 x 100/1000Base-T RJ45 Auto Negotiation, Auto MDI/MDIX, 802.3at/af PoE+ complaint
2 x 100/1000M SFP
System LED DP410L-LV LED: 2 x Power, 1 x DO/ALM
  DO: Red On
  Power: Green On
Ethernet Port LED Link (Green On), Activity (Green Blinking)
PoE power feeding: Amber on, PoE power not feeding: Off
SFP LED Port: Link (Green On), Activity (Green Blinking); 1000M: Speed 1000M (Amber On), Speed 100M (Off)
Reset System Reboot(2-6 Seconds)/Default Settings Reset(over 7 Seconds)
Console 1 x RS232 in RJ45 for System Configuration. Baud Rate: 115200.n.8.1,
DS410L Pin Define: 3: RxD, 4: TxD, 6:GND
Power Input 4-Pin Removable Terminal Block Connector
   4 Pins for Redundant Power

Power Requirement

  
Input Voltage DP410L-LV: Dual 24VDC Booster (12~57VDC to 54V PoE Output)
Reverse Polarity Protect Yes
Input Current DP410L-LV: 6A@24VDC
Power Consumption DP410L-LV: Max. 145W@24VDC full traffic with 120W PD loading, suggest reserving 15% tolerance

PoE

  
Power forwarding mode Alternative A
PoE Power Budget System: Max. 120W@24V~57VDC, Max.60W@12VDC
Per Port: Max. 30W
PoE Standard IEEE 802.3af/at
Management PoE Enable/Disable, System/Port Power Budget Control, PoE Status
 

Software

  
Management Interface WebGUI, Command Line Interface (CLI), Telnet, SNMP
Network Management IPv4 management, SNMP v1/v2c/v3/Trap, MIBs, LLDP, DHCP client, TFTP, System Log, NTP
Traffic Management Flow Control, Port Trunk/802.3ad LACP, VLAN, Private VLAN, Shared VLAN, Rate Limiters, Port Mirror, IGMP Snooping v2, Port classification, Port policing, Port scheduler, Port shaping, QoS control list, Storm policing, WRED, Port Security, ACL, Loop Protection
Security IEEE 802.1X/RADIUS, Management IP, Management VLAN, SSL
Redundancy Rapid Spanning Tree Protocol/Spanning Tree Protocol (RSTP/STP)

Mechanical

  
Installation DIN-Rail
Enclosure Material Steel Metal
Dimension 78x155x125 (W x H x D) / without DIN Rail Clip
Ingress Protection IP31
Weight ~985g without package

Environmental

  
Operating Temperature & Humidity -40°C~70°C , 0%~95% Non- Condensing
Storage Temperature -40°C~85°C
MTBF >200,000 hours
Warranty 5 years
Standard  
CE

EN IEC 61000-6-2 Immunity standard for Industrial Environment

EN IEC 61000-6-4 Emission standard for Industrial Environment,

  EN61000-4-2 ESD, EN61000-4-3 RS, EN61000-4-4 EFT, EN61000-4-5, EN61000-4-6 CS,

  EN61000-4-8 Magnetic Field
FCC

FCC part 15B Class A
Safety

IEC62368-1/IEC60950-1

Model Name

Description
DP410L-LV Industrial 10-port Full Gigabit L2 Managed PoE Switch, 2GSFP+8GT PoE+
  Package List
1 x Product Unit (Without SFP Transceiver)
2 x 4-pin Removable Terminal Block Connector
1 x Attached Din Clip
1 x Quick Installation Guide
 

 

10/100/1000
Base-T

Combo (GT/SFP)

100/1000
Base-X

802.3at PoE+

WAN

Console/
USB

DI/DO

Power Input

Software

Redundancy

Temp.
DP410L-LV 8 - 2 8 - 1/0 1/1 24V
(12~57V)		 L2+ STP/RSTP -40~70°C
DS410L 8 - 2 -   1/0 1/1 12~48V L2+ STP/RSTP -40°C~75°C
DS410L-MM/SS-SC 8 - 2x
1000-X
SC Type		 - - 1/0 1/1 12~48V L2+ STP/RSTP -40°C~75°C
DS410F 2 2 6 -   1/0 1/1 12~48V L2+ STP/RSTP -40°C~75°C
BACK